Skip to product information
1 of 3

RoseauxClayCo

Teardrop Hair Clip Base with Matching Cutter

Regular price $6.75
Regular price Sale price $6.75
Sale Sold out
Shipping calculated at checkout.
Option
🔒 Secure checkout
Visa Mastercard American Express PayPal

PRODUCT DETAILS

Zinc alloy hair accessory base with a recessed tray for your clay designs. The matching cutter is 3D printed in PLA and designed to cut clay inserts for the tray.

Suitable for polymer clay and air-dry clay. Add your favorite colors, patterns, and textures to create a personalized hair accessory.

DIMENSIONS

Overall Size: The hair clip measures approximately 81 × 24 × 18 mm (3.19 × 0.94 × 0.71 inches), measured at its widest points when closed.

Matching Cutter: Cuts a clay shape approximately 78 × 22 mm (3.07 × 0.87 inches). Measurements refer to the cut-out shape, not the outside of the cutter.

All measurements are taken by hand and are approximate. Slight variations in size may occur.

HOW TO USE

Step 1: Roll out a smooth clay slab and add your desired pattern or texture.

Step 2: Use the matching cutter to cut the shape for the tray.

Step 3: Cure the clay piece separately. For polymer clay, bake according to the clay manufacturer’s instructions and let it cool completely. For air-dry clay, allow it to dry fully.

Do not bake the clay together with the hair clip base.

Step 4: Test the fit inside the tray. If needed, gently sand the edges of the cured or fully dried clay piece, then remove any dust.

Step 5: Glue the clay piece into the tray using a glue suitable for your clay type and zinc alloy. Allow the glue to cure fully according to its instructions before wearing.

TIPS & NOTES

Slight variations in the hair clip trays may occur during manufacturing. The matching cutter is intentionally slightly smaller than the tray to make fitting easier.

If your clay piece does not fit due to tray variations, gently sand the edges until it sits comfortably inside. Avoid forcing it into place.

Both polymer clay and air-dry clay pieces must be glued to the base, even if they fit snugly.

CARE INSTRUCTIONS

Hair Clip: Wipe gently with a soft, dry cloth. Avoid soaking and prolonged contact with water, perfume, or harsh cleaning products. Store in a dry place and handle gently to protect the clay insert.

Clay Cutter: Hand wash gently with cool or lukewarm water and mild soap, then allow to dry. Do not place in the dishwasher, bake, or expose to high heat.