Water-soluble polymer clay transfer sheets featuring original designs by RoseauxClayCo.

Sheet size: approximately 10 × 13 cm (3.9 × 5.1 inches).

Matching cutters are available for select designs. Please check the options above.

Step 1: Roll out your polymer clay to an even thickness.

Step 2: Place the transfer sheet face down on the clay and gently roll over it to ensure good contact.

Step 3: Apply water to dissolve the paper backing, then gently remove any remaining paper fibers.

Step 4: Allow the surface to dry completely, then cut out your shapes and bake according to your clay manufacturer’s instructions.

Step 5: Once baked and cooled, if any paper fibers remain on the surface, gently rinse or wipe them away with water. Allow the piece to dry completely.

Step 6: Seal the design with UV resin or varnish to help protect the colors and create a glossy finish.

• For the most vibrant results, use the transfer sheet on white polymer clay. Colors may appear less visible on darker clay.

• Press the transfer sheet firmly and evenly onto the clay to help the design transfer.

• To help protect the design, you may loosely cover your pieces with aluminum foil while baking.

• Colors may vary slightly depending on your screen settings.

• Store unused transfer sheets in a dry place and keep them away from water, as the paper will dissolve if it gets wet.